Extron electronics DVS 304 Series User Manual page 80

Presets page
The page (located under the
Presets
input presets, and works in conjunction with the
Figure 46. Presets Page
Memory presets
To create a memory preset, do the following:
1. Click the
User Control
appears (see figure 45
2. Click the button for the input (inputs 1, 2, or 3) you would like to preset.
3.
Make changes to the attributes (for example, aspect ratio, zoom, brightness, etc.) of
your chosen input and press
4. Click the link on the left side. The
Presets
5. Use the drop-down menu to choose preset numbers 1, 2 or 3.
6. Click the button.
Save
To return to a preset created after other changes were made, click the
under the preset number. The preset attributes are restored.
Input presets (input 4 only)
To create a input preset, do the following:
1. From the
Configuration
2.
Select the desired input format for input 4.
3. Click the
User Control
appears (figure 45).
4. Click the button for input 4.
5. Make changes to the picture control settings (for example: aspect ratio, zoom,
brightness). You can also create OSD text that is saved as part of the preset. This
name can identify the device connected to this input for reference (for example: DVD,
VCR).
6.
Click the link on the left side. The
Presets
7. Use the drop-down menu to choose preset numbers 1 through 128.
8. Click . The OSD text you created for the preset appears with the preset number.
Save
To return to a preset created after other changes were made, click the
under the preset name/number. The preset attributes are restored. The OSD text appears
on the top left corner for a time specified by the OSD duration setting.
To determine how long the OSD text appears on the screen, click the
link under the
Configuration
tab), provides access to memory and
Control
User Control
link on the left side of the page. The
on the previous page).
.
Enter
Presets
tab, click the
Scaler Setting
link on the left side of the page. The
Presets
tab and select a duration length.
DVS 304 Series • Ethernet Control
page.
page
User Control
page appears (figure 46, above).
button
Recall
link at the left side.
page
User Control
page appears (figure 46, above).
button
Recall
Scaler Settings
73