Adding Engine Oil - Husqvarna FE 450 Owner's Manual

18 SERVICE WORK ON THE ENGINE
18.4

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
–
Remove filler plug
oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear of
the engine.
–
Install and tighten the oil filler plug with O-ring.
401955-12
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Install the engine guard. (
–
Check the engine oil level. (
Main work
–
Remove oil filler plug
–
Fill engine oil to the middle
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
We recommended changing the engine oil when necessary.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
–
F00439-10
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (

with the O-ring from the clutch cover and fill up with engine
1.2 l (1.3 qt.)
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
p. 70)
p. 102)

with the O-ring from the clutch cover.

of the level viewer.
p. 117)
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
p. 102)
Engine oil (SAE 10W/50) (
105
p. 117)