Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - Husqvarna FE 450 Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4

Kill switch

6.5

Horn button

The clutch lever
The clutch is hydraulically operated and self-adjusting.
F00257-10
The hand brake lever
The hand brake lever is used to activate the front brake.
F00258-10
The throttle grip
F00259-10

Kill switch
Possible states
• Kill switch
the engine can be started.
• Kill switch
goes out if it was running, or does not start if it was off.
F00260-10
The horn button
Possible states
• Horn button
• Horn button
F00260-11

is fitted on the left side of the handlebar.

is fitted on the right side of the handlebar.

is fitted on the right side of the handlebar.
is fitted on the left side of the handlebar.
in basic position – the ignition circuit is closed in this position and
pressed – the ignition circuit is open in this position, the engine

is fitted on the left side of the handlebar.
in neutral position
pressed – the horn is actuated in this position.
14