Speed, Time, And Dst Distance 1; Speed, Time, And Dst2 Distance 2; Avg Average Speed, Art Operating Hours, And Odo Total Distance Covered - Husqvarna FE 450 Owner's Manual

7 SPEEDOMETER
7.8

Speed, time, and DST distance 1

7.9

Speed, time, and DST2 distance 2

7.10

AVG average speed, ART operating hours, and ODO total distance covered

–
Press one of the buttons until DST appears on the speedometer.
KM/H or M/H shows the speed.
shows the time.
DST shows the distance since the last reset, such as between two refueling stops.
Info
If the value of 39999.9 is exceeded, DST is automatically reset to 0.0.
Press the left but-
ton briefly.
401901-01
Press the left but-
ton for 3 – 5 sec-
onds.
Press the right
button briefly.
Press the right
button for 3 – 5
seconds.
–
Press one of the buttons until DST2 appears on the speedometer.
KM/H or M/H shows the speed.
shows the time.
DST2 shows the distance 2 since the last reset, such as between two refueling stops.
Info
If the value of 39999.9 is exceeded, DST2 is automatically reset to 0.0.
Press the left but-
ton briefly.
401902-01
Press the left but-
ton for 3 – 5 sec-
onds.
Press the right
button briefly.
Press the right
button for 3 – 5
seconds.
–
Press one of the buttons until AVG, ART and ODO appear in the speedometer.
AVG shows the average speed since the last reset.
ART shows the operating hours.
ODO shows the total distance covered.
Press the left but-
ton briefly.
Press the left but-
ton for 3 – 5 sec-
onds.
401903-01
Press the right
button briefly.
Press the right
button for 3 – 5
seconds.
Next display mode
DST can be preset to a value between 0.0 and 39999.9 by
pressing the buttons.
Next display mode
DST is reset to 0.0.
Next display mode
DST2 can be preset to a value between 0.0 and 39999.9 by
pressing the buttons.
Next display mode
DST2 is reset to 0.0.
Next display mode
The OPEN END WRENCH SYMBOL shows the remaining
operating hours until the next service is due.
Next display mode
AVG is reset to 0.0.
24