Closing The Filler Cap; Cold Start Button - Husqvarna FE 450 Owner's Manual

6 CONTROLS
Warning
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
6.13

Closing the filler cap

6.14

Cold start button

–
Press release button
F00265-10
–
Fit the filler cap and turn clockwise until release button
Info
Route fuel tank breather hose
F00266-10
The cold start button
The injection system extends the injection time if the engine is cold and the outside
temperature is low. To help the engine burn the increased amount of fuel, it must be
supplied with additional oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle grip again, or turn-
ing the throttle grip towards the front, the cold start button returns to its original posi-
tion.
Info
Check whether the cold start button has returned to its basic position.
Possible states
The cold start button is activated – The cold start button is pushed in all the way.
•
The cold start button is deactivated – The cold start button is in its basic posi-
•
tion.
F00449-10

, turn the filler cap counterclockwise, and lift it off.

without kinks.

is fitted on the bottom of the throttle valve body.
17

locks in place.