Combination Switch; Indicator Lamps Overview; Opening The Filler Cap - Husqvarna FE 450 Owner's Manual

6 CONTROLS
6.10

Combination switch

6.11

Indicator lamps overview

6.12

Opening the filler cap

Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
The combination switch is fitted on the left side of the handlebar.
Possible states
1
1TC
2
2TC
Warning
Voiding of the government approval for road use and the insurance cov-
erage If the combination switch is installed, the vehicle's approval for road
use is invalidated.
–
Only operate the vehicle in closed-off areas remote from public road traffic
if the combination switch is installed.
The engine characteristic can be changed using button MAP on the combination
switch.
The Launch Control and the traction control can also be activated via the combina-
H01181-10
tion switch.
Possible states
F00264-01
STANDARD – STANDARD mapping is activated when LED 1 lights up.
STANDARD with TC – STANDARD mapping with traction control is
activated when LED 1 and TC light up.
ADVANCED – ADVANCED mapping is activated, when LED 2 lights
up.
ADVANCED with TC – ADVANCED mapping with traction control is
activated when LED 2 and TC light up.
The high beam indicator lamp lights up blue – The high beam is
switched on.
Malfunction indicator lamp lights up/flashes yellow – The OBD has
detected an emission- or safety-critical fault.
The fuel level warning lamp lights up yellow – The fuel level has
reached the reserve mark.
Turn signal indicator lamp flashes green – The turn signal is switched
on.
16