Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling In The Main Silencer - Husqvarna FE 450 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.28

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
12.29

Installing the main silencer

12.30

Changing the glass fiber yarn filling in the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the right side cover. (
Main work
–
Disconnect spring
Spring hook (50305017000)
–
Remove screws
K00594-10
Main work
–
Position the main silencer. Mount screws
–
Attach spring
Spring hook (50305017000)
–
Tighten screws
Guideline
Remaining screws, chassis
K00595-10
Finishing work
–
Install the right side cover. (
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (
p. 58)

.

and take off the main silencer.

.

.
p. 58)
p. 58)
p. 59)

but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
59