15
ELECTRICAL SYSTEM
15.7
Installing the headlight mask with the headlight
15.8
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Main work
–
Connect plug-in connectors
F00340-11
–
Position the headlight mask and secure it with rubber bands
The holding lugs engage in the fender.
F00341-10
–
Position brake line
F00342-10
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
wise all the way and remove it.
–
Pull bulb socket
F00343-10
.
and wiring harness
p. 91)
together with the underlying bulb socket counterclock-
of the parking light out of the reflector.
.
in the brake line guide.
p. 89)
90