Important Notes; Manufacturer And Implied Warranty; Operating And Auxiliary Substances; Spare Parts, Accessories - Husqvarna FE 450 Owner's Manual

3

IMPORTANT NOTES

3.1

Manufacturer and implied warranty

The work prescribed in the service schedule must be carried out by an authorized Husqvarna Motorcycles workshop only and con-
firmed both in the customer's Service & Warranty Booklet and in the Husqvarna Motorcycles Dealer.net; otherwise, all warranty
claims will be void. Damage or secondary damage caused by tampering with and/or conversions on the vehicle are not covered by
the warranty.
Additional information on the manufacturer or implied warranty and the procedures involved can be found in the service booklet.
3.2

Operating and auxiliary substances

Warning
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
Use operating and auxiliary substances (such as fuel and lubricants) as specified in the Owner's Manual.
3.3

Spare parts, accessories

For your own safety, only use spare parts and accessory products that are approved and/or recommended by Husqvarna Motor-
cycles and have them installed by an authorized Husqvarna Motorcycles workshop. Husqvarna Motorcycles accepts no liability for
other products and any resulting damage or loss.
Certain spare parts and accessory products are specified in parentheses in the descriptions. Your Husqvarna Motorcycles dealer
will be glad to advise you.
The current Husqvarna Motorcycles accessories for your vehicle can be found on the Husqvarna Motorcycles website.
International Husqvarna Motorcycles website: www.husqvarna-motorcycles.com
3.4

Service

A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work on the engine and
chassis is properly carried out as described in the Owner's Manual. Incorrect adjustment and tuning of the engine and chassis can
lead to damage and breakage of components.
Use of the vehicle under difficult conditions, such as on sand or on wet and muddy surfaces, can lead to considerably more rapid
wear of components such as the drive train, brake system, or suspension components. For this reason, it may be necessary to
inspect or replace parts before the next scheduled service.
It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly, you will ensure a
much longer service life for your motorcycle.
3.5

Figures

The figures contained in the manual may depict special equipment.
In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not always necessary to
disassemble the component to perform the activity in question. Please follow the instructions in the text.
3.6

Customer service

Your authorized Husqvarna Motorcycles dealer will be happy to answer any questions you may have regarding your vehicle and
Husqvarna Motorcycles.
A list of authorized Husqvarna Motorcycles dealers can be found on the Husqvarna Motorcycles website.
International Husqvarna Motorcycles website: www.husqvarna-motorcycles.com
9