Wheels, Tires; Removing The Front Wheel; Installing The Front Wheel - Husqvarna FE 450 Owner's Manual

14

WHEELS, TIRES

14.1

Removing the front wheel

14.2

Installing the front wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Press the brake caliper onto the brake disc by hand in order to push back the
brake pistons.
Info
Make sure that you do not press the brake caliper against the spokes
when pushing back the brake pistons.
F00335-10
–
Loosen screw
–
Loosen screws
–
Press on screw
–
Remove screw
F00313-10
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
–
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of
the fork.
Info
F00337-10
Do not pull the hand brake lever when the front wheel is removed.
–
Remove spacers
H00934-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease shaft seal rings
Long-life grease (
H00935-10

by several rotations.

.

to push the wheel spindle out of the axle clamp.

.
Always lay the wheel down in such a way that the brake disc is not
damaged.

.

p. 118)
p. 45)

and contact surface of the spacers.
80