Installing The Shock Absorber - Husqvarna FE 450 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.17

Installing the shock absorber

–
Disconnect plug-in connector
F00458-10
–
Remove screws
–
Pull off foot brake cylinder from the push rod.
F00459-10
–
Remove the connecting link of the chain.
–
Take off the chain.
F00294-01
–
Remove nut
–
Push the swingarm back and secure it against falling over.
F00460-10
–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
F00461-10
Main work
–
Carefully position the shock absorber into the vehicle from the bottom.
–
Mount and tighten screw
Guideline
Screw, top shock
absorber
F00462-10

.

.

and pull out the swingarm pivot.

.
M10

.
60 Nm Loctite ®
(44.3 lbf ft)
53
2701™