Store - HP 1650B Programming Reference Manual

STORe

STORe
Command Syntax:
where:
Example:
7-14
[:CONFig]
The STORe command stores a configuration onto a disk. The [:CONFig]
specifier is optional and has no effect on the command. The c name >
parameter specifies the file to be stored to the disk. The < description z=
parameter specifies the file description.
:: = string of up to 10 alphanumeric characters representing a valid file name
:: = string of up to 32 alphanumeric characters
OUTPUT XXX;" :MMEM:STORE
command
SETUPS'"
HP 1650B/HP 16518
Programming Reference