HP 1650B Programming Reference Manual page 214

Accumulate
Accumulate
Command Syntax:
Example:
Query Syntax:
Returned Format:
Example:
14-4
The Accumulate command allows you to control whether the waveform
display gets erased between individual runs or whether subsequent
waveforms are allowed to be displayed over the previous waveforms.
The Accumulate query returns the current setting. The query always
shows the setting as the character "0" (off) or "1" (on).
OUTPUT XXX;" :MACHINEl:SWAVEFORM:ACCUMULATE
10 DIM String$[lOO]
20 OUTPUT
30 ENTER XXX;
40 PRINT Stringf
50 END
command/query
{{ON 1 1) 1 (OFF 1 0))
ON"
HP 1650B/HP 1651B
Programming Reference