HP 1650B Programming Reference Manual page 265

OSEarch
Command Syntax:
where:
<origin 7
Example:
Query Syntax:
Returned Format:
Example:
HP 1650B/HP 1651B
Programming Reference
The OSEarch command defines the search criteria for the 0 marker
which is then used with the associated OPATtern recognizer specification
and the OCONdition when moving markers on patterns. The origin
parameter tells the marker to begin a search with the trigger or with the X
marker. The actual occurrence the marker searches for is determined by
the occurrence parameter of the OPATtem recognizer specification,
relative to the origin. An occurrence of 0 places a marker on the selected
origin. With a negative occurrence, the marker searches before the origin.
With a positive occurrence, the marker searches after the origin.
The OSEarch query returns the search criteria for the 0 marker.
:MACHine{l 12):TWAVeform:OSEarch
:: = {TRIGger plAF&er)
:: = integer from -9999 to +QQQQ
OUTPUT XXX;
:MACHine{l J2):TWAVeform:OSEarch?
10 DIM Os$ [loo]
20 OUTPUT XXX;":MACHINEl:TWAVEFORM:OSEARCH?"
30 ENTER XXX;
40 PRINT Os$
50 END
command/query
<occurrence
OSEarch
19-13