HP 1650B Programming Reference Manual page 205

XPATtern
Command Syntax:
where:
<label-pattern
Examples:
16518
HP 1650B/HP
Programming Reference
The XPATtern command allows you to construct a pattern recognizer
term for the X Marker which is then used with the XSEarch criteria when
moving the marker on patterns. Since this command deals with only one
label at a time, a complete specification could require several invocations.
When the value of a pattern is expressed in binary, it represents the bit
values for the label inside the pattern reco@zer term. In whatever base
is used, the value must be between 0 and 2 - 1, since a label may not have
more than 32 bits. Because the < labelqattem > parameter may contain
don't cares, it is handled as a string of characters rather than a number.
The XF'ATtern query returns the pattern specification for a given label
name.
1 IP}:SLISt:XPATtem
:: = string of up to 6 alphanumeric characters
:: = "{#B{OI 1 IX} . . . 1
O U T P U T XXX;":MACHINEl:SLIST:XPATTERN
O U T P U T XXX;":MACHINEl:SLIST:XPATTERN
command/query
<label-name > , <label-pattern
XPATtern
13-23