HP 1650B Programming Reference Manual page 88

DATA
177
191
205
219
14485
14499
Glitch Timing Data
System Commands
6 1 4
1
Machine
Machine 2
Status Status
Status
Status
Status Status
Status Status
Status Status
Status Status
*The headings are not a part of the returned data.
Status Bytes. In glitch timing mode, the status bytes indicate whether a
given row in the data contains actual acquisition data information or glitch
information.
1
Bit is the Data vs. Glitch bit. If Bit
contains glitch information. If Bit 1 is clear, then this row contains actual
acquisition data as obtained from the target system.
Information Bytes. In the Glitch timing mode, the target system is
sampled at every sample period. The data is then stored in memory and
the glitch detectors are checked. If a glitch has been detected between the
previous sample and the current sample, the corresponding glitch bits are
set. The glitch information is then stored. If this is the first stored sample
in memory, then the glitch information stored should be discarded.
P o d 4 P o d 3
Pod 5
Data Data
Data
Data Data
Data
Count count count
Data Data Data
count count
Count
1
is set, this row of information
Programming Reference
Pod2 Pod
Data Data
Data Data
count count
Data Data
Count Count
HP 1650B/HP 16518