HP 1650B Programming Reference Manual page 177

STORe
Command Syntax:
where:
c any-term >
<and-term 1 >
c or-term2 >
HP 1650B/HP 16518
Programming Reference
The STORe command defines the store qualifier for a given sequence
level. Any data matching the STORe qualifier will actually be stored in
memory as part of the current trace data. The qualifier may be a single
term or a complex expression. The terms A through H are defined by the
TERM command. The meaning of INRange and OUTRange is
determined by the RANGe command.
Expressions are limited to what you could manually enter through the
Format menu. Regarding parentheses, the syntax definitions below show
only the required ones. Additional parentheses are allowed as long as the
meaning of the expression is not changed.
A detailed example is provided in figure 12-2.
The STORe query returns the current store qualifier specification for a
given sequence level c N > .
:: = an integer from 1 to the number of existing sequence levels (maximum 8)
:: = { ANYState
(<expression1 > [{ANDlOFt)
:: = { <or-term1
:: = { <or-term1 > [OR <or-term1 z-l... 1 <and-term1 >[AND <and-term1 >I...}
:: = { <or_term2> [OR <or_term2>]...
: : = {A~B~C~D~INBange~OLJTFtange}
: : = { NOTA( N O T B I NOTC I NOTD I INRange
: : = {EIFIGIH}
:: = {NOTE ( NOTFI NOTG I NOTH)
command/query
<store-qualifier >
STORe
12-17