HP 1650B Programming Reference Manual page 286

BASE
BASE
command
The BASE command sets the base in which symbols for the specified label
the symbol offsets are displayed when symbols are used.
Note !b
case the base will default to HEXadecimaI.
Command Syntax:
where:
:: = string of up to 6 alphanumeric characters
:: = {BINary ) HEXadecimal 1 OCTal ) DECimal 1 ASCii)
Example: OUTPUT XXX;":MACHINEl:SYMBOL:BASE
HP 1650B/HP 16518
20-4
Programming Reference