WLlSt Subsystem
Introduction
Note 3 h th
= real number
time-value
HP 1650B/HP 166lB
Programming Reference
Two commands in the WLISt subsystem control the X and 0 marker
placement on the waveforms portion of the Timing/State mixed mode
display. These commands are XTIMe and OTIMe. The XSTate and
markers can only be placed on the timing waveforms, the queries return
what state (state acquisition memory location) the marked pattern is
stored in.
t e o er must be a state analyzer with time tagging on (use
Figure 9-l. WLlSt Subsystem Syntax Diagram
WLlSt Subsystem
9-l