Load; Contents - HP 1650B Programming Reference Manual

LOAD

Note f!b
Command Syntax:
where:
c name >
Examples:
HP 1650B/HP 1651B
Programming Reference
[:CONFig]
The LOAD command loads a file from the diik into the analyzer. The
[:CONfig] specifier is optional and has no effect on the command. The
logic analyzer.
Any previous setups and data in the instrument are replaced by the
contents of the confiiation file.
< n a m e >
:: = string of up to 10 alphanumeric characters representing a valid file name
OUTPUT XXX;":MMEMORY:LOAD:CONFIG 'FILE-"'
OUTPUT XXX;":MMEMORY:LOAD 'FILE-"'
OUTPUT XXX;":MMEM:LOAD:CONFIG 'FILE-A"'
LOAD
command
7-9