Hp 1650B/Hp - HP 1650B Programming Reference Manual

LOAD
LOAD
Note @
Command Syntax:
where:
Examples:
7-10
This variation of the LOAD command allows inverse assembler files to be
loaded into analyzer 1 or analyzer 2 of the HP 1650B/51B. The
c L4 name > parameter specifies the inverse assembler filename. The
machine the inverse assembler is loaded.
l
' Inverse assembler files should only be loaded into the state analyzer. If an
inverse assembler file is loaded into the timing analyzer no error will be
generated; however, it will not be accessible.
:: = string of up to 10 alphanumeric characters representing a valid file name
OUTPUT XXX;":MMEMORY:LOAD:IASSEMBLER
OUTPUT XXX;":MMEM:LOAD:IASS
command
HP 1650B/HP 1651B
Programming Reference