Command Syntax:
where:
c setting >
Example:
Query Syntax:
Returned
Format:
Example:
19-6
The Accumulate command allows you to control whether the chart
display gets erased between each individual run or whether subsequent
waveforms are allowed to be displayed over the previous ones.
The Accumulate query returns the current setting. The query always
shows the setting as the character "0" (off) or "1" (on).
1 12):lWAVeform:ACCumulate
: : = {O~OFF}or{l~ON}
OUTPUT XXX;":MACHINE1:TWAVEFORM:ACCUMLJLATE
1 /2}:TWAVeform:ACCumulate?
[ : M A C H i n e { l I2}:TWAVeform:ACCumulate]
1 0 DIM P$ [loo]
20 OUTPUT XXX;" :MACHINEl:TWAVEFORM:ACCUMULATE?"
30 ENTER XXX; P$
40 PRINT P$
50 END
command/query
( s e t t i n g >
ON"
HP 1650B/HP 16518
Programming Reference