Hp-Ib Commands - HP 1650B Programming Reference Manual

HP-IB Commands

Command
Parallel Poll Uncorrfigure
(Multiline Command)
Parallel Poll Configure
(Addressed Command)
Parallel Poll Enable
(Secondary Command)
Parallel Poll Disable
(Secondary Command)
Status Reporting
B-12
The following paragraphs describe actual HP-IB commands which can be
used to perform the functions of the Basic commands shown in the
previous examples.
Parallel Poll Unconfigure
command (PPU) resets all parallel poll devices to the idle state (unable to
respond to a parallel poll).
Configure Command. The parallel poll configure command
Parallel Poll
(PPC) causes the addressed listener to be configured according to the
parallel poll enable secondary command PPE.
Parallel Poll Enable Command.
command (PPE) configures the devices which have received the PPC
command to respond to a parallel poll on a particular HP-IB DIO line
with a particular level.
Parallel Poll Disable Command.
command (PPD) disables the devices which have received the PPC
command from responding to the parallel poll.
Table B-l. Parallel Poll Commands
M n e m o n i c
PPE
PPD
Command. The parallel poll unconfigure
The parallel poll enable secondary
The parallel poll disable secondary
Character
21
96-111
112
Programming Reference
NAK
I-O
P
HP 1650B/HP 16518