HP 1650B Programming Reference Manual page 213

SWAVeform
Command Syntax:
Example:
HP 1650B/HP 16518
Programming Reference
The SWAVeform (State Waveform) selector is used as part of a
compound header to access the settings in the State Waveform menu. It
always follows the MACHine selector because it selects a branch directly
below the MACHine level in the command tree.
XXX;" :MACHINEZ:SWAVEFORM:RANGE
OUTPUT
SWAVeform
selector
40"
SWAVeform Subsystem
14-3