HP 1650B Programming Reference Manual page 263

OPATtern
Command Syntax:
where:
c label-name >
c label-pattern >
Example:
HP 1650B/HP 16518
Programming Reference
The OPATtern command allows you to construct a pattern recognizer
term for the 0 marker which is then used with the OSEarch criteria and
deals with only one label at a time, a complete specification could require
several commands.
When the value of a pattern is expressed in binary, it represents the bit
values for the label inside the pattern reco@zer term. In whatever base
is used, the value must be between 0 and 2
more than 32 bits. Because the c labelqattern > parameter may contain
don't cares, it is handled as a string of characters rather than a number.
The OPATtern query, in pattern marker mode, returns the pattern
specification for a given label name. In the time marker mode, the query
returns the pattern under the 0 marker for a given label. If the 0 marker
is not placed on valid data, don't cares (XX...X) are returned.
1
: MACHine{
:: = string of up to 6 alphanumeric characters
OUTPUT XXX;
c label-name >, <label-pattern >
. . 1
. . }"
OPATtern
command/query