Figure 3-6: Pcie Mini Slot Location; Figure 3-7: Pcie Mini Card Installation - IEI Technology AFL-xxA-N26 User Manual

AFL-xxA-N26 Series Panel PC

Figure 3-6: PCIe Mini Slot Location

Insert into the socket at an angle. Line up the notch on the card with the notch
Step 3:
on the connector. Slide the PCIe Mini card into the socket at an angle of about
20º.

Figure 3-7: PCIe Mini Card Installation

Push down until the card clips into place. Push the other end of the card
Step 4:
down until it clips into place on the plastic connector.
Attach the thermal pad onto the mSATA card. Use the thermal pad come with
Step 5:
the AFL-xxA-N26 to attach onto the controller chips of the mSATA card
(Figure 3-8). If there is a label sticker on the mSATA card, remove the sticker
first.
Page 37