Mouse - Xilinx Spartan-3 User Manual

Starter kit board
Table of Contents

Advertisement

R
The following site contains more information on PS/2 keyboard interfaces:

Mouse

A mouse generates a clock and data signal when moved; otherwise, these signals remain
High indicating the Idle state. Each time the mouse is moved, the mouse sends three 11-bit
words to the host. Each of the 11-bit words contains a '0' start bit, followed by 8 data bits
(LSB first), followed by an odd parity bit, and terminated with a '1' stop bit. Each data
transmission contains 33 total bits, where bits 0, 11, and 22 are '0' start bits, and bits 10, 21,
and 32 are '1' stop bits. The three 8-bit data fields contain movement data as shown in
Figure
Mouse status byte
L
R
0
1 XS YS XV YV P
1
0
Start bit
Idle state
As shown in
moving the mouse to the right generates a positive value in the X field, and moving to the
left generates a negative value. Likewise, moving the mouse up generates a positive value
in the Y field, and moving down represents a negative value. The XS and YS bits in the
status byte define the sign of each value, where a '1' indicates a negative value.
The magnitude of the X and Y values represent the rate of mouse movement. The larger the
value, the faster the mouse is moving. The XV and YV bits in the status byte indicate when
the X or Y values exceed their maximum value, an overflow condition. A '1' indicates
30
The AT-PS/2 Keyboard Interface
http://panda.cs.ndsu.nodak.edu/~achapwes/PICmicro/keyboard/atkeyboard.html
6-4. Data is valid at the falling edge of the clock, and the clock period is 20 to 30 kHz.
X direction byte
1
0
X0 X1 X2 X3 X4 X5 X6 X7 P
Stop bit
Start bit
Figure 6-4: PS/2 Mouse Transaction
Figure
6-5, a PS/2 mouse employs a relative coordinate system wherein
-X values
(XS=1)
Figure 6-5: The Mouse Uses a Relative Coordinate System to Track Movement
www.xilinx.com
1-800-255-7778
Chapter 6: PS/2 Mouse/Keyboard Port
Y direction byte
1
0
Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 P
Stop bit
Start bit
+Y values
(YS=0)
-Y values
(YS=1)
Spartan-3 Starter Kit Board User Guide
1
Stop bit
Idle state
UG130_c6_04_042404
+X values
(XS=0)
UG130_c6_05_042404
UG130 (v1.1) May 13, 2005

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spartan-3 fpga

Table of Contents