Table of Contents
Advertisement
R
Additional FPGA logic is required to read the Platform Flash data, as described in the
following application note.
•
"Disable" Option
If the JP1 jumper is removed, then the Platform Flash is disabled, potentially allowing
configuration via an expansion board connected to one of the expansion connectors.
40
XAPP694: Reading User Data from Configuration PROMs
http://www.xilinx.com/bvdocs/appnotes/xapp694.pdf
www.xilinx.com
1-800-255-7778
Chapter 10: Platform Flash Configuration Storage
Spartan-3 Starter Kit Board User Guide
UG130 (v1.1) May 13, 2005
Hide quick links:
Advertisement
Table of Contents
