Checking The Configuration - Huawei AR2200-S Series Configuration Manual

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
Context
In master/backup mode, only one backup group is created. The routers have different priorities
in this backup group. The router with the highest priority serves as the master and other
routers are backups.
In load balancing mode, two backup groups or more are created. Every router has different
priorities in different backup groups. Every router plays a role based on its priority in a specific
backup group. Different priorities are set for every router to allow that the masters of VRRP
backup groups are distributed on different routers.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
vrrp vrid virtual-router-id priority priority-value
The priority of the router in a VRRP backup group is configured.
By default, the priority is 100. Priority 0 is reserved for special purpose. Priority 255 is reserved
for the IP address owner and this priority cannot be configured. A priority ranges from 1 to 254.
----End

2.3.4 Checking the Configuration

By viewing the VRRP backup group status, you can check whether the configurations are
successful.
Prerequisite
The configurations of the VRRP backup group are complete.
Procedure
l
----End
Example
In master/backup mode, after the configuration, run the display vrrp command to view the
VRRP backup group status.
<Huawei> display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
Issue 01 (2012-01-06)
Run the display vrrp [ interface interface-type interface-number [ virtual-router-id ] ]
[ brief ] command to check the VRRP backup group status.
State : Master
Virtual IP : 10.137.217.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 VRRP Configuration
72