Huawei AR2200-S Series Configuration Manual page 118

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
[RouterB] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
Run the undo shutdown command on GE 2/0/0 of Router C. Wait 20 seconds after GE 2/0/0
goes Up, and run the display vrrp command on Router A to view the VRRP status. The VRRP
status of Router A is Master.
[RouterA] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
[RouterB] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
----End
Configuration Files
l
Issue 01 (2012-01-06)
State : Master
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 100
Preempt : YES Delay Time : 0
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time : 2011-04-19 16:48:13
Last change time : 2011-04-19 16:48:13
State : Master
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Preempt : YES Delay Time : 20
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Track NQA : admin test1
NQA state : success
Create time : 2011-04-19 16:51:38
Last change time : 2011-04-19 16:51:42
State : Backup
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
Preempt : YES Delay Time : 0
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time : 2011-04-19 16:51:13
Last change time : 2011-04-19 16:51:13
Configuration file of Router A
#
sysname RouterA
#
interface GigabitEthernet1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Priority reduced : 40
2 VRRP Configuration
110