Huawei AR2200-S Series Configuration Manual page 112

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
Step 5 Verify the configuration.
# Run the shutdown command on GE 2/0/0 on Router A to simulate a link fault.
[RouterA] interface gigabitethernet 2/0/0
[RouterA-GigabitEthernet2/0/0] shutdown
[RouterA-GigabitEthernet2/0/0] quit
Run the display vrrp command on Router A. You can see that the status of Router A changes
to Initialize.
<RouterA> display vrrp
GigabitEthernet2/0/0 | Virtual Router 10
Run the display vrrp command on Router B. You can see that Router B becomes the master
router and the BFD session when it is Down.
<RouterB> display vrrp
GigabitEthernet2/0/0 | Virtual Router 10
----End
Issue 01 (2012-01-06)
MasterPriority : 160
Preempt : YES
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0110
Check TTL : YES
Config type : normal-vrrp
Track BFD : 2
BFD-Session State : UP
Create time : 2010-06-22 17:33:00
Last change time : 2010-06-22 17:33:04
State : Initialize
Virtual IP : 10.1.1.3
Master IP : 10.1.1.1
PriorityRun : 160
PriorityConfig : 160
MasterPriority : 0
Preempt : YES
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0110
Check TTL : YES
Config type : normal-vrrp
Create time : 2010-06-22 17:32:56
Last change time : 2010-06-22 17:33:06
State : Master
Virtual IP : 10.1.1.3
Master IP : 10.1.1.2
PriorityRun : 180
PriorityConfig : 140
MasterPriority : 180
Preempt : YES
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0110
Check TTL : YES
Config type : normal-vrrp
Track BFD : 2
BFD-Session State : DOWN
Create time : 2010-06-22 17:33:00
Last change time : 2010-06-22 17:33:06
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Delay Time : 0 s
Priority increased : 40
Delay Time : 0 s
Delay Time : 0 s
Priority increased : 40
2 VRRP Configuration
104