Huawei AR2200-S Series Configuration Manual page 64

Enterprise router
Hide thumbs Also See for AR2200-S Series:
Table of Contents

Advertisement

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
Issue 01 (2012-01-06)
Proc interface status
WTR Interval (ms)
-
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
PDT Index
Session Description
------------------------------------------------------------------------------
--
Total UP/DOWN Session Number : 0/1
After 10s, run the display standby state command on RouterA. The command output
shows that the BFD session status is ERR, and the status of backup interface Serial 1/0/0:15
is Up, indicating that the backup interface has started.
<RouterA> display standby state
Interface
Loadstate
Backup-flag
meaning:
M---MAIN
B---BACKUP
USED
D---LOAD
P---
PULLED
----------------------------------------------------------------------------
Below is track BFD
information:
Bfd-Name
State
test
----------------------------------------------------------------------------
Below is track IP route
information:
Destination/Mask
State
------------------------------------------------------------------------------
--
Below is track NQA
Information:
Instance Name
State
Run the undo shutdown command on GigabitEthernet1/0/0 of RouterB to make the
interface Up. After 10s, run the display standby state command on RouterA. The
command output shows that the BFD session status is OK and backup interface Serial
1/0/0:15 has switched to the standby state.
<RouterA> display standby state
Interface
Loadstate
Backup-flag
meaning:
M---MAIN
B---BACKUP
USED
D---LOAD
P---
PULLED
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: Disable
:
: 3
: No Diagnostic
: No Application Bind
: -
: -
: FSM-0|RCV-0|IF-0|TOKEN-0
: -
Interfacestate Backupstate Backupflag Pri
V---MOVED
U---
Bfd-State
BackupInterface
ERR
Serial 1/0/0:15
Route-State
BackupInterface
BackupInterface
Interfacestate Backupstate Backupflag Pri
V---MOVED
U---
1 Interface Backup Configuration
Process PST
Session Detect TmrID
Session WTR TmrID
UP
: Disable
: -
: -
56

Advertisement

Table of Contents
loading

Table of Contents