Huawei AR2200-S Series Configuration Manual page 69

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
3.
4.
5.
6.
Issue 01 (2012-01-06)
10.2.1.0/24 53
0.0.0.0
Total Nets:
7
Intra Area: 7 Inter Area: 0
Configure C-DCC on RouterA.
# Create dialer group 1 and configure a dialer rule in the group.
[RouterA] dialer-rule
[RouterA-dialer-rule] dialer-rule 1 ip permit
[RouterA-dialer-rule] quit
# Configure the synchronous serial interface.
[RouterA] controller e1 1/0/0
[RouterA-E1 1/0/0] pri-set
[RouterA-E1 1/0/0] quit
# Assign an IP address to PRI1/0/0:15, enable C-DCC, and configure the dialer number.
[RouterA] interface Serial 1/0/0:15
[RouterA-Serial1/0/0:15] ip address 3.1.1.1 24
[RouterA-Serial1/0/0:15] dialer enable-circular
[RouterA-Serial1/0/0:15] dialer-group 1
[RouterA-Serial1/0/0:15] dialer route ip 3.1.1.2 600502
[RouterA-Serial1/0/0:15] quit
# Configure a static route.
[RouterA] ip route-static 3.1.1.0 255.255.255.0 Serial 1/0/0:15
Configure C-DCC on RouterB.
# Create dialer group 2 and configure a dialer rule in the group.
[RouterB] dialer-rule
[RouterB-dialer-rule] dialer-rule 2 ip permit
[RouterA-dialer-rule] quit
# Configure the synchronous serial interface.
[RouterB] controller e1 1/0/0
[RouterB-E1 1/0/0] pri-set
[RouterB-E1 1/0/0] quit
# Assign an IP address to PRI1/0/0:15, enable C-DCC, and configure the dialer number.
[RouterB] interface Serial 1/0/0:15
[RouterB-Serial1/0/0:15] ip address 3.1.1.2 24
[RouterB-Serial1/0/0:15] dialer enable-circular
[RouterB-Serial1/0/0:15] dialer-group 2
[RouterB-Serial1/0/0:15] dialer route ip 3.1.1.1 600501
[RouterB-Serial1/0/0:15] quit
# Configure a static route.
[RouterB] ip route-static 3.1.1.0 255.255.255.0 Serial 1/0/0:15
Configure association between interface backup and routing on PRI1/0/0:15 of RouterA.
[RouterA] interface Serial 1/0/0:15
[RouterA-Serial1/0/0:15] standby track ip route 4.1.1.0 255.255.255.0
[RouterA-Serial1/0/0:15] quit
Verify the configuration.
After the configuration is complete, RouterA can ping the destination IP address 4.1.1.2/24.
<RouterA> ping -a 2.1.1.1 4.1.1.2
PING 4.1.1.2: 56 data bytes, press CTRL_C to
break
Reply from 4.1.1.2: bytes=56 Sequence=1 ttl=255 time=1
ms
Reply from 4.1.1.2: bytes=56 Sequence=2 ttl=255 time=5
ms
Reply from 4.1.1.2: bytes=56 Sequence=3 ttl=255 time=1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Stub 2.1.1.2
ASE: 0 NSSA: 0
1 Interface Backup Configuration
10.10.10.2
61