Huawei AR2200-S Series Configuration Manual page 125

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
Run the undo shutdown command on GE 1/0/0 of Router C. Wait 20 seconds after GE 1/0/0
goes Up, and run the display vrrp command on Router A to view the VRRP status. The VRRP
status of Router A is Master.
[RouterA] display vrrp
[RouterB] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
----End
Configuration Files
l
Issue 01 (2012-01-06)
GigabitEthernet1/0/0 | Virtual Router 1
State : Master
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 110
Preempt : YES Delay Time : 20
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Track IP route : 192.198.1.2/24
IP route state : Reachable
Create time : 2011-06-08 15:49:45
Last change time : 2011-06-08 16:02:45
State : Backup
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
Preempt : YES Delay Time : 0
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time : 2011-06-08 15:49:45
Last change time : 2011-06-08 16:02:45
Configuration file of Router A
#
sysname RouterA
#
isis 1
is-level level-1
network-entity 10.0000.0000.0001.00
#
interface GigabitEthernet1/0/0
ip address 10.1.1.1 255.255.255.0
vrrp vrid 1 virtual-ip 10.1.1.10
vrrp vrid 1 priority 120
vrrp vrid 1 preempt-mode timer delay 20
vrrp vrid 1 track ip route 192.198.1.0 255.255.255.0 reduce 40
isis enable 1
#
interface GigabitEthernet2/0/0
ip address 192.168.1.1 255.255.255.0
isis enable 1
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Priority reduced : 40
2 VRRP Configuration
117