Configuring Vrrp Applications In Vlanif; Establishing The Configuration Task; Configuring Vrrp On Vlanif - Huawei AR2200-S Series Configuration Manual

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability

2.5 Configuring VRRP Applications in VLANIF

By configuring a VRRP backup group on VLANIF interfaces, you can perform the fast VRRP
switchover.

2.5.1 Establishing the Configuration Task

Before configuring a VRRP backup group on VLANIF interfaces, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the data required for
the configuration. This will help you complete the configuration task quickly and accurately.
Applicable Environment
VLANIF supports VRRP functions.
Pre-configuration Tasks
Before configuring VRRP on the VLANIF interface, complete the followings tasks:
l
l
l
l
Data Preparation
To configure VRRP on the VLANIF interface, you need the following data.
No.
1
2
3
4

2.5.2 Configuring VRRP on VLANIF

By creating a VRRP backup group on VLANIF interfaces, you can use the standby VLANIF
interface to take over network traffic when the active VLANIF interface goes Down.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2012-01-06)
Configuring physical parameters for interfaces
Configuring link layer attributes for interfaces
Configuring sub-VLAN
Configuring super-VLAN
Data
Super-VLAN ID
Sub-VLAN ID
Backup group ID
Virtual IP address of the backup group
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 VRRP Configuration
76