Huawei AR2200-S Series Configuration Manual page 104

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
l Check that Router A can perform preemption after recovering.
----End
Configuration Files
l
l
l
Issue 01 (2012-01-06)
Master IP : 10.1.1.2
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 100
Preempt : YES
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time
Last change time
Run the undo shutdown command on GE 2/0/0. On Router A, run the display vrrp
command to view VRRP status 20 seconds after GE 2/0/0 being Up. You can view that Router
A restores to be the master router.
Configuration file of Router A
#
sysname RouterA
#
interface GigabitEthernet1/0/0
ip address 192.168.1.1 255.255.255.0
#
interface GigabitEthernet2/0/0
ip address 10.1.1.1 255.255.255.0
vrrp vrid 1 virtual-ip 10.1.1.111
vrrp vrid 1 priority 120
vrrp vrid 1 preempt-mode timer delay 20
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 10.1.1.0 0.0.0.255
#
return
Configuration file of Router B
#
sysname RouterB
#
interface GigabitEthernet1/0/0
ip address 192.168.2.1 255.255.255.0
#
interface GigabitEthernet2/0/0
ip address 10.1.1.2 255.255.255.0
vrrp vrid 1 virtual-ip 10.1.1.111
#
ospf 1
area 0.0.0.0
network 192.168.2.0 0.0.0.255
network 10.1.1.0 0.0.0.255
#
return
Configuration file of Router C
#
sysname RouterC
#
interface GigabitEthernet1/0/0
ip address 192.168.1.2 255.255.255.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Delay Time : 0
: 2010-06-22 17:33:00
: 2010-06-22 17:33:06
2 VRRP Configuration
96