Huawei AR2200-S Series Configuration Manual page 33

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
<Huawei> system-view
[Huawei] sysname RouterB
[RouterB] dialer-rule
[RouterB-dialer-rule] dialer-rule 2 ip permit
# Configure the physical interface.
[RouterB] controller e1 1/0/0
[RouterB-E1 1/0/0] pri-set
[RouterB-E1 1/0/0] quit
[RouterB] controller e1 2/0/0
[RouterB-E1 2/0/0] pri-set
[RouterB-E1 2/0/0] quit
# Assign an IP address to Dialer0, enable C-DCC, and configure the dialer number.
[RouterB] interface Dialer 0
[RouterB-Dialer0] ip address 20.1.1.2 24
[RouterB-Dialer0] dialer enable-circular
[RouterB-Dialer0] dialer-group 2
[RouterB-Dialer0] dialer route ip 20.1.1.1 broadcast 660220
[RouterB-Dialer0] quit
# Add PRI1/0/0:15 and PRI2/0/0:15 to the dialer circular group.
[RouterB] interface Serial 1/0/0:15
[RouterB-Serial1/0/0:15] dialer circular-group 0
[RouterB-Serial1/0/0:15] quit
[RouterB] interface Serial 2/0/0:15
[RouterB-Serial2/0/0:15] dialer circular-group 0
[RouterB-Serial2/0/0:15] quit
# Configure a routing protocol.
[RouterB] rip
[RouterB-rip-1] network 20.0.0.0
[RouterB-rip-1] import-route direct
[RouterB-rip-1] quit
----End
Configuration Files
# Configuration file of RouterA
#
sysname RouterA
#
controller E1 1/0/0
pri-set
#
interface Serial1/0/0:15
link-protocol ppp
ip address 20.1.1.1 255.255.255.0
dialer enable-circular
dialer-group 1
dialer route ip 20.1.1.2 broadcast
660210
dialer route ip 20.1.1.2 broadcast 660208
#
interface GigabitEthernet2/0/0
standby interface Serial1/0/0:15
#
dialer-rule
dialer-rule 1 ip permit
#
rip 1
network 20.0.0.0
import-route direct
Issue 01 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Interface Backup Configuration
25