Huawei AR2200-S Series Configuration Manual page 116

Enterprise router
Hide thumbs Also See for AR2200-S Series:
Table of Contents

Advertisement

Huawei AR2200-S Series Enterprise Routers
Configuration Guide - Reliability
[RouterA-GigabitEthernet1/0/0] quit
# Configure a VRRP backup group with VRID of 1 on Router B.
[RouterB] interface gigabitethernet 1/0/0
[RouterB-GigabitEthernet1/0/0] vrrp vrid 1 virtual-ip 10.1.1.10
[RouterB-GigabitEthernet1/0/0] quit
After completing the preceding configurations, run the display vrrp command on Router A and
Router B. The VRRP status of Router A is Master, and that of Router B is Backup. Use the
display on Router A as an example.
[RouterA] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
[RouterB] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
Step 3 Configure an NQA test instance with the destination IP address of 20.1.1.1/24 on Router A.
[RouterA] nqa test-instance admin test1
[RouterA-nqa-admin-test1] test-type icmp
[RouterA-nqa-admin-test1] destination-address ipv4 20.1.1.1
[RouterA-nqa-admin-test1] ttl 10
[RouterA-nqa-admin-test1] frequency 20
[RouterA-nqa-admin-test1] start now
After completing the preceding configuration, run the display nqa results test-instance admin
test1 command on Router A. The NQA test instance is successful.
[RouterA] display nqa results test-instance admin test1
NQA entry(admin, test1) :testflag is active ,testtype is icmp
1 .Test 1 result
Issue 01 (2012-01-06)
State : Master
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Preempt : YES
Delay Time : 20
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac :
0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time : 2011-04-19 16:16:38
Last change time : 2011-04-19 16:16:42
State : Backup
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
Preempt : YES
Delay Time : 0
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac :
0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Create time : 2011-04-19 16:18:13
Last change time : 2011-04-19 16:18:13
The test is finished
Send operation times: 3
Completion:success
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:20.1.1.1
Min/Max/Average Completion Time: 60/90/80
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive response times: 3
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
2 VRRP Configuration
108

Advertisement

Table of Contents
loading

Table of Contents