External Interface; Topology - NEC WL1700-MS Installation Manual

Names and Functions of Each Part of WL1700-MS
Chapter 1

External Interface

The following explains the external interface.
External Interface
Ether Connector
Reset Switch
Note.
Reset Switch is available to use only when CONT STATUS lamp or AP Status
either lights green.

Topology

Topology with WL1700-MS is as follows:
Note.
Internal Access Point in WL1700-MS cannot be controlled by other WL
Controllers.
32
One RJ45 Ports are attached on the back face.
Either 10BASE-T or 100BASE-TX is available
Used to reboot WL1700-MS. Pressing it for a long time returns
WL1700-MS to its factory-set condition.
For more information, refer to
page 174.
WL1700-MS
WL1500-AP WL1500-AP
OVERVIEW
Remarks
"In the case of WL1700-MS" on
WL1500-AP