NEC WL1700-MS Installation Manual page 199

Example 1) When copying the configuration file (file name: configuration) into
TFTP Server (192.168.0.1).
WL111111#copy configuration tftp://192.168.0.1/configuration
Note.
The procedures for backup can take the same result. For more information,
refer to "Backup" on page 168.
Copy configuration stored in flash card into TFTP Server.
Running-Config
100M LINK 100M LINK
PWR ALM ACT LOAD
Ether1
GatoNegro
Simulator
copy configuration tftp://192.168.0.1/configuration
Note:
When you modified the configuration, use the save config command to copy it into flash card.
And then proceed to the above. Otherwise, the modified data will not be copied into TFTP Server.
configuration
Flash Card
100M LINK 100M LINK
PWR ALM ACT LOAD
Ether2 Ether1 Ether2
SYSTEM MAINTENANCE
Configuration Management
Chapter 6
TFTP
TFTP Server
192.168.0.1
165