NEC WL1700-MS Installation Manual page 80

Mounting
Chapter 3
Screwing the rack mounting brackets to the sides (Using open rack)
M4 Screw
(Attachment on
the module)
Mount WL Controller into 19-inch rack.
2
For safety purposes, this task must be done by several installers.
When mounting it into standard EIA 19-inch rack, fix two brackets firmly,
using attachment screws.
When mounting it into standard JIS 19-inch rack, screw the middle points of
two brackets using attachment screws.
Caution! Mounting the Controller into a 19-inch rack other than recommended ones
might cause the rear module to hang from the rack. In this case, also use optional mount
brackets for rear module to secure it.
M5 Screw
46
Rack Mounting Bracket (Attachment on the module)
Front
Rear
How to Mount into EIA-Standard Rack
19-inch rack (inch type)
INSTALLATION
Rack Mounting Bracket
Attachment on the module
M4 Screw
Attachment on the module
*Attachment on 1U BRACKET (E)