Delete Configuration Files - NEC WL1700-MS Installation Manual

Configuration Management
Chapter 6
Restore backup configuration file saved in TFTP Server
To restore configuration file saved in TFTP Server, type the following command.
Using CLI
Use restore system {TFTP Sever address and file name}.
For example, save it as System-backup in TFTP Server (192.168.0.1).
WL111111#
restore system
The following will be restored from TFTP Server.
- Boot configuration file
- Digital certificate file
If you want to back up all the configuration files, put an optional parameter
"all" after the command. For example:
WL111111#
restore system
Using WebView
Select [Commands] - [Restore System]. And then specify necessary
information and click the Restore button.
The following will be restored in TFTP Server
- All configuration file (when all is typed as optional parameter)
- Boot configuration file (when critical is typed as optional parameter)
- Digital certificate file
Note.
Use the Copy command to back up configuration file into TFTP Server. For more
information, refer to "Copy" on page

Delete Configuration Files

To delete configuration file, type delete {file name}.
170
tftp://192.168.0.1/System-backup
tftp://192.168.0.1/System-backup all
164.
SYSTEM MAINTENANCE