Specify a system IP address for WL Controller.
5
Select [Controller] - [System] on the main menu. Specify the following and
click the Apply button.
ITEMS
System IP Address
Changing the system IP address of WL Controller will cause all the related APs to
reset.
If you specify a system IP address different from the interface IP address and it is
applied to the WL Controller, the screen will not be able to display. Therefore,
before saving configuration, check to see the system IP address by selecting
[Monitoring] - [Summary].
REMARKS
Assign a system IP address for WL Controller.
[Basic Setting: 192.168.10.10]
INITIAL SETUP
Data Assignment
Chapter 4
Basic Settings
123