Table of Contents
Advertisement
Data Assignment
Chapter 4
Enable/Disable Secure Shell (SSH) service for the purpose of maintenance.
14
Type set ip ssh server {enable | disable} to enable/disable SSH service. This
function is enabled at default.
The following is an example when SSH service is enabled in the command.
WL111111#set ip ssh server
Enable/Disable Web Interface (WebView) for the purpose of maintenance.
15
Type set ip https server {enable | disable} to enable/disable Web Console
(WebView). This function is enabled at default. The following is an example
when Web Console service is enabled in the command.
WL111111#set ip https server
Enable/Disable SNMP service for the purpose of maintenance.
16
If you will use UNIVERGE WL Management System (WLMS), this function
must be enabled. Type set ip snmp server {enable | disable}. This function is
enabled at default.
The following is an example when SNMP service is enabled in the command.
WL111111#set ip snmp server
Specify the VLANs.
17
Type set vlan {VLAN ID:1–4093} name {VLAN:Up to 16 characters with no
space can be specified}
The following is an example when vlan ID (2) and vlan name (necvlan) are
specified in the command.
WL111111#set vlan
Type set vlan {VLAN ID:1–4093} port {Physical Port Number:1-2} tag
{VLAN tag:1–4093}.
The following is an example when vlan ID (2), Physical Port Number (1), and
vlan tag (2) are specified in the command.
WL111111#set vlan
Assign an IP address on each interface.
18
90
enable
enable
enable
2
name
necvlan
2
port
1
tag
2
INITIAL SETUP
Basic Settings
- Quick Links:
- Univerge Wl1700-Ms
Hide quick links:
Advertisement
Table of Contents
