NEC WL1700-MS Installation Manual page 200

Configuration Management
Chapter 6
Example 2) Restore data (file name: newconfig) to WL Controller from TFTP
Server (192.168.0.1)
WL111111#copy tftp://192.168.0.1/newconfig newconfig
WL111111#set boot configuration-file
Copy a configuration file stored in TFTP Server into the flash card.
It cannot be overwritten to the configuration file stored in the flash card .
Running-Config
100M LINK 100M LINK
PWR ALM ACT LOAD
Ether1 Ether2
GatoNegro
Simulator
copy tftp://192.168.0.1/newconfig newconfig
set boot configuration-file newconfig
Note:
When you want to use the configuration file copied from TFTP Server, restart the WL
Controller to apply the new configuration.
Note.
WL Controller can contain several configuration files and select one of them
when restarts.
To display the configuration files stored in the Flash Card, enter dir.
166
configuration
Flash Card
100M LINK 100M LINK
PWR ALM ACT LOAD
Ether1 Ether2
SYSTEM MAINTENANCE
newconfig
TFTP
TFTP Server
192.168.0.1