Data Assignment - NEC WL1700-MS Installation Manual

Data Assignment

Chapter 4
Data Assignment
Use Command Line Interface (CLI), Web Interface (WebView) or Initial Setup to
assign data for WL Controller and Access Points.
Assign the data by referring to the following:
Order Setup Tool
CLI Setup Data
Assignment
(page
WebView Setup Data
1
Assignment
(page
Initial Setup
(page
2
74
WL Equipment Remarks
WL5100
SCA-WL10
75)
WL5100
SCA-WL10
109)
WL1700-MS
146)
INITIAL SETUP
Used to set up details of the
data settings by command via
telnet.
Provides data setup by Web
Browser.
In the case of using this setup
tool, Internet Explorer 6.0 is
required.
Provides easy data setup from
an initial state by Web
Browser.
In the case of using this setup
tool, Internet Explorer 6.0 is
required.