NEC WL1700-MS Installation Manual page 184

Data Assignment
Chapter 4
Configure Basic System Information
1
Table 5. Configure Basic System Information
PARAMETERS
System Name
Country Installed
IP Address
Subnet Mask
Default Gateway
Admin User Name
Admin Password
Confirm Admin Password
150
REMARKS
Specify a system name [A maximum
of 255 alphanumeric characters, no
space]. By default, UNIVERGE is
assigned.
Select a country code
Specify an IP address for the system
Specify a subnet mask for the system
Specify the IP address of Default
Gateway.
Specify an account name for
administrative privilege[A maximum
of 31 alphanumeric characters, no
space]. By default, nec is assigned.
Specify a password for the above [A
maximum of 38 alphanumeric
characters, no space]. By default, nec
is assigned.
Re-type the same password to verify
Admin Password.
INITIAL SETUP