NEC WL1700-MS Installation Manual page 164

Data Assignment
Chapter 4
Create Service Profiles.
12
In UNIVERGE WL system, a set of data assignment for Security (Security
Policy), which can be specified per ESSID, is managed as a Service Profile.
To create the Service Profile, select [WLANs] - [Service Profiles] on the
main menu. Click the New button to display the New Service Profile screen.
Specify the following and click the Add button.
ITEMS
Profile Name
SSID Name
Security Type
WEP DefKey1
WEP DefKey2
WEP DefKey3
WEP DefKey4
WEP Unicast Index
WEP Multicast Index
130
Basic Settings
REMARKS
Service Profile name
[Basic Setting 1:Dot1x-B]
[Basic Setting 2:WPA-B]
[Basic Setting 3:WPA-A]
SSID
[Basic Setting 1:B1]
[Basic Setting 2:B2]
[Basic Setting 3:A1]
Security Setting
- Clear (none)
- WPA
- WPA2
- 802.1X
- Static WEP
[Basic Setting 1:802.1X]
[Basic Setting 2:WPA]
Index 1 of Wired Equivalent Privacy (WEP) Key
(available when Static WEP is selected in the Security
Type)
Index 2 of WEP Key (available when Static WEP is
selected in the Security Type)
Index 3 of WEP Key (available when Static WEP is
selected in the Security Type)
Index 4 of WEP Key (available when Static WEP is
selected in the Security Type)
Assign the index number of Static WEP key to unicast
traffic (available when Static WEP is selected in the
Security Type).
Assign the index number of Static WEP key to
multicast traffic (available when Static WEP is selected
in the Security Type).
INITIAL SETUP