NEC WL1700-MS Installation Manual page 193

Click the Apply button to apply the settings to the AP
5
When no error occur:
l
"Success! You have completed configuration of this device" is displayed.
Click the OK button to apply the setting to the system.
Then, the configuration data is automatically saved and the system will be
restarted.
When an input error occurs:
l
An instruction message is displayed in the screen, indicating which
parameter input is wrong.
When data update error occurs
l
If an error occurs during the data update process, the message "Error
occurred. Do you want to reset and retry configuration? If you want to
reset, please wait for 3 minutes." is displayed. click the OK button to
restart and reset the system. In 3 minutes or later, access to the controller
by entering
Internet Explorer, and re-assign data.
Note.
The configuration of a Controller and subordinate Access Points are stored in
the WL Controller alone. When APs connect to a WL Controller, the APs downloads their
configuration files from the WL Controller.
http://192.168.100.10/quickstart/
INITIAL SETUP
Data Assignment
Chapter 4
in the URL box of the
159