Appendix; Certificates; Accessories And Spare Parts; I/O Connections And Wiring - Siemens SITRANS FUP1010 Operating Instructions Manual

Appendix

A.1

Certificates

All certificates are posted on the Internet. Additionally, the CE Declaration of Conformity as
well as EX approvals are available on the Sitrans F literature CD-ROM Certificates
www.siemens.com/processinstrumentation/certificates)
A.2

Accessories and spare parts

In order to ensure that the ordering data you are using is not outdated, the latest ordering data
is always available on the Internet: Catalog process instrumentation
processinstrumentation/catalogs)
See also
Process instrumentation catalog (http://www.siemens.com/processinstrumentation/catalogs)
A.3

I/O Connections and Wiring

Terminal Block Wiring - FUP1010 IP67 Battery Powered 2 Channel/2 Path Weatherproof Flowmeter
Wiring
(Refer to manual drawing 1010WDP-7 sheet 2 of 2)
Note
Single Channel flowmeters have the same terminal pin numbers and signals.
The terminal block wiring table applies to the part numbers listed below.
Table A-1
1010WDP-7 (Sheet 2 of 2) Drawing
FUP1010
Table A-2 2 Channel/2 Path Input/Output Terminal Block Wiring
Pin# Signal
A GND
B N/C
C R1B
FUP1010 IP67 Portable Flowmeter
Operating Instructions, 02/2010, A5E02951522A Revision 01
Part Numbers and Connection Data
7ME3510
Function
Signal Ground
N/C
Logic Out 1
Description
Return For Signals
No Connection
Logic Level State (HIGH=5 to 3 Vdc; LOW= 1 to 0 Vdc)
A
(http://
(http://www.siemens.com/
137